POWERCUT Oxy Acetylene Cutting Machine
The CR PLASMA controller can manage an oxy-acetylene head and switch a dual-process machine between plasma and oxy-fuel cutting. Oxy-fuel is generally considered for thicker steel where the plasma power needed for the job would carry a higher installation and operating cost.
Specifications
OXY FUEL cutting head
The controller stores the gas-flow pressure and timing settings used by the oxy-fuel process.
Capacitive height Control
An optional capacitive sensor provides automatic height regulation while the oxy-fuel head is moving and cutting.
Twin process
One controller can operate two Z axes. The software selects the plasma or oxy-fuel Z axis according to the active cutting process.
Gallery
Oxy-fuel cutting is commonly used for thicker steel when plasma is less suitable for the required edge or power demand. The examples below show an oxy-fuel system fitted to a CR PLASMA POWERCUT machine.
Videos
…
OXY fuel cutting on the CR PLASMA system.
CR PLASMA OXY FUEL CUTTING
-
Programmable control of the gas feeds to the cutting head
-
Capacitive height control option for height regulation
-
Controller can run dual process with two Z axes installed.
-
The machine lowers the plasma or oxy-fuel Z axis according to the selected process
-
Can be fitted to all machines in the CR PLASMA Range
Discuss Oxy Acetylene Cutting Machine for a U.S. Application
AVM Technologies LLC in Texas is the first contact for this product in the United States. Share the material, thickness range, table size, production requirements, and site location so the technical questions can be reviewed with CR PLASMA in Dublin. Supply, installation, training, and service scope are confirmed for each project.