Retrofit Services Durma 10 x 3

This machine was bought by a client and had an existing retrofit fitted. The system was difficult to work with, had no library of settings, and had a very limited interface.

The machine has had the following work carried out:

Fully stripped of the old controller and wiring
New closed-loop AC servos fitted to the existing gearboxes and wired into the controller
All new limit switches were wired and fitted
New generation CR PLASMA torch post system fitted
Full CR PLASMA controller console / HMI and integrated operator interface system
The machine is now fully back up and running using the existing 300A UltraCut XT from Thermal Dynamics

10M x 3M Durma Retrofit by CR PLASMA.

This machine was already retrofitted when Glenn purchased it. It was badly retrofitted. We rewired and refitted the machine with new servos, cables and now a new 301 Ultract XT from Thermal Dynamics.

CR PLASMA Retrofit of a 10m x 3m Durma Plasma video thumbnail

Using This Retrofit as a Project Reference

This page records work completed by CR PLASMA on Durma 10 x 3 Retrofit • Services. It is evidence of that project, not a fixed package for every machine. A U.S. retrofit starts with photographs, machine details, control and plasma information, required materials, and a review of service availability.